106-horsepower 1.6L I4 5-speed manual FWD
Pontiac G3 in Ontario, Canada - May 2015 | |||
Aug 201363079 miC $393 | Replace faulty ignition coil unit | ||
Dec 201481220 miC $149 | Brought car into dealer to diagnose a lean burn condition code stored in computer. Dealer said nothing wrong, recommended run fuel injector cleaner through tank. (found out later cause was un-metered air due to leaky intake hose. | ||
May 201586800 miC $583 | Dealer wanted $300 for a module! Dealer previously failed to properly diagnose reason DTC code (lean burn). took care into dealer to diagnose cause of DTC (lean burn). Dealer cleared computer told me codes were for fan and my fan motor was burned out. Dealer wanted $450 for repair. Replaced ball joint and lower control arm passenger side Replaced both axle seals due to badly leaking Replaced ball joint and lower control arm Replaced both axle seals due to badly leaking |
106-horsepower 1.6L I4 4-speed automatic FWD
Pontiac G3 in Texas, United States - Jun 2014 | |||
Jun 201441963 miUS $135 | G3 hesitates and stalls since about 15k miles. Had PCM reflashed with tis s3114b8. Works fine now less cost and time spent. |
Pontiac G3 in Ontario, Canada - Sep 2011 | |||
Nov 201022320 mi | Car still creaked from front end when turning brought to dealership second time for same problem. | ||
Dec 201024800 mi | Had to replace all bushing in front end of car. covered under warranty. | ||
Jul 201129760 mi | Control arm bushings replaced, 3 trips to dealer have replaced almost whole front end on car. | ||
Sep 201134720 mi | Car would not accelerate properly and would not shift had to replace module that controls accelerator pedal. |